Gönderen Konu: Bachmann E-Z Command Dynamis  (Okunma sayısı 3607 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

Çevrimdışı Okan

  • Kulüp Üyesi
  • Forum Üyesi
  • Yer: ?stanbul
  • İleti: 1120
Bachmann E-Z Command Dynamis
« : Mart 12, 2008, 19:38:52 »
Geçen hafta Almanya'dan aldığım MIBA ( Die Eisenbahn Im Modell ) dergisinin Mart 2008 sayısında bulunan Bachmann Dynamiz hakkındaki "Kabellose Digitale-Steuerung-Dynamis von Bachmann" : "Kablosus Dijital Kontrol-Bachmann'dan Dynamis" başlıklı makaleyi paylaşıyorum.

VGB grubun, MIBA dergisi, bolca ürün incelemesi, bolca kurgu tanıtımı, ve bolca da dükkan reklamı olan, çok güzel düzenlenmiş bir dergi. Sadece Almanca olması biraz üzücü.

Şimdilik sadece sayfaları paylaşıyorum,

Dynamis'in  önemli özelliği kablosuz bir kumanda oluşu. Yani gördüğünüz LCD ekranlı kumanda panelini istediğiniz yere götürebiliyorsunuz, iletişim Piko benzeri InfraRed olarak sağlanıyor. NMRA uyumlu olduğu belirtilmiş, 21 fonksiyon destekliyor, 4 basamaklı adresleme var, lokomotiflere Hornby Elitede olduğu gibi isim verebiliyorsunuz, 100 aksesuar dekoderı kullanabiliyor. Ayrıca ESU, EcoS ile birlikte kullanıbilirlik özelliği ile daha ucuz çözümlerle büyümeye izin veriyor.

Burada fiyat 149E olarak belirtilmiş, ben dükkanda 139.90Euro olarak etiket fiyatı görmüştüm. İç fonksiyonalitesinde, fonksiyon sayısı(yeni yazılımda değişecek sanırım) ve belki LCD kullanımı açısından biraz önde görünüyor, ancak kendisinin doğrudan USB bilgisayar bağlantısı yok ve gövde güzel olmayan bir plastik görünüme sahipti.



« Son Düzenleme: Mart 12, 2008, 19:51:34 Gönderen: Obiwan »

Çevrimdışı Necati

  • Necati
  • Forum Üyesi
  • Forum Üyesi
  • *
  • Yer: Ankara
  • İleti: 99
Bachmann E-Z Command Dynamis(İngilizcesi)
« Yanıtla #1 : Mart 12, 2008, 20:17:38 »
E-Z Command DYNAMIS Wireless DCC Digital Control System from BACHMANN

About Dynamis

E-Z Command Dynamis allows the operator total freedom by integrating advanced infra red wireless technology into an affordable and powerful Digital Command Control System. Using a unique toggle style joystick both speed and selection of locomotive are controlled. A backlit LCD screen with graphical interface and easy to use menu buttons make programming of CVs and operation of the unit is simplicity itself. Locomotives can be recalled by either selecting the locomotives by Name or Number and both 2 and 4 digit addressing is supported. The 10 function buttons allow for simple One Touch Operation allowing for different sounds and lighting to be operated. In addition by simply selecting A or B bank on the menu button you can operate decoders which support up to 20 functions.
Accessory decoders can also be fully controlled from the E-Z Command Dynamis system allowing you operate Turnout/Points and signals, plus a host of other exciting accessories which are coming on to the market every day.
EZ Command Dynamis allows you to be in total control of your railway with the freedom you deserve.
The 36-508 Dynamis Pro Box allows for three additional wireless controllers and several wired controllers to be added plus PC interface transforming your E-Z Command Dynamis into an E-Z Command Dynamis Pro system.
E-Z Command Dynamis will work with DCC decoders that comply with NMRA DCC standards, including for example Digitrax, ESU, MRC, Gaugmaster, NCE, Lenz, Zimo, TCS, Soundtraxx, Hornby and ZTC.
E-Z Command Dynamis has been designed to be compliant to NMRA standards utilising the latest technology and allowing you to enjoy running your railway the way you desire.


Special Features

•   Advanced wireless infrared operation
•   2.5 amp power supply
•   128 speed steps
•   Full CV programming
•   Full NMRA conformance
•   9,999 locomotive addresses
•   Turnout and accessory control
•   Expandable modular design
•   Easy-to-use backlit LCD screen
•   Allows 40 consists of up to 5 locomotives each
•   Control of up to 40 locomotives at any one time (up to 21 functions per locomotive)
•   Suitable for all layouts from train sets to sophisticated railway systems
•   Joystick control for speed and on screen selection

How it works

1) Infrared signals sent from handset to receiver using wide angle transmitter array.
2) Input signal detected by wide angle receivers.Signal confirmed via two way communication.
3) Base station processes signal and sends DCC command to track.
4) Decoder in locomotive responds to DCC commands and controls the train precisely to match the operators handset inputs.


Okan Bey Merhaba,

Bahsettiğiniz kumanda yaklaşık 3 aydır İngiltere'de satılıyor.Daha çok kişinin okuyabilmesi için kumanda hakkındaki özet bilgileri
İngilizce olarak yolluyorum.İlgilenen arkadaşlara.......

Selamlar....
« Son Düzenleme: Mart 12, 2008, 22:57:09 Gönderen: nsoget »